DSC501
(Click
Here for Video)
 Advanced
counter-terrorism barrier system
for sub-surface conditions that negate
extensive excavations
K12/L3
certification meets government’s
highest levels…exceeds Department
of State and Department of Defense
requirements
This barricade was designed for
the U.S. Navy and has also been
selected for use at U.S. Embassies. Set
in a foundation only 18 inches
(46 cm) deep, the Delta DSC501
is able to survive and operate
after a 1.2 million foot pound
impact. Upon extracting the
truck after its crash test, the
barricade was fully functional
and performed a resounding 27,000
cycles with no wear!
With its shallow foundation and
aesthetic design, it is a major
breakthrough in high duty, anti-terrorist
barricades. It obviates the
concerns of interference with buried
pipes, power lines and fiber optic
communication lines. The
shallow foundation also reduces
installation complexity, time,
materials and corresponding costs. The
DSC 501 is suitable for high water
table locations and areas with
corrosive soils.
Front face warning lights warn
drivers that the barricade is in
the “up” position. There
is also an open area on the front
for signage. Diagonal yellow
and white stripes are standard
and optional colors and graphics
are available. The open channel
construction even lets you specify
hot dip galvanizing.
Certified
by: |
U.S.
Dept. of State/U.S. Dept. of Defense |
Certification
Level: |
K12,
L3 |
Fully
Operational after Successful
Vehicle Stop |
Gross
Vehicle Weight |
15,000
pounds/66.7 kN@ |
Crash
Speed |
50
mph/80kph |
Capable
of Stopping and Destroying
a Vehicle |
Gross
Vehicle Weight |
20,000
pounds/88.9 kN@13,200 pounds/58.7
kN@ |
Crash
Speed |
70
mph/113 kph 85
mph/137 kph |
 |
In the lowered position, the
DSC501’s barrier ramp is
completely flush with the roadway. Buttresses,
counterweights and road plates
do not obstruct authorized pedestrian
or vehicular traffic.
The DSC501 is raised and lowered
to and from the guard position
via hydraulic cylinders driven
by Delta’s patent-pending
hydraulic power unit. This
unit can be configured to operate
one or more DSC501's
and provide pass-through rates
of 3 to 15 seconds, suitable
for most inspection and identification
station requirements. However,
when danger is imminent, the
barricade rises in less than
2 seconds!
A vehicle detector safety loop
is available.
DSC501
Barricade Printable Information
.pdf file
DSC501
Printable Information .pdf file |
|
| 
