|
|
Delta's Beam barricades are available
in hydraulic and manually operated models. All
are crash rated with one version enhanced
for applications at nuclear power plants. The
clear openings range from 10.5 to 20
feet (3200 mm to 7315 mm).
Models DSC7500 and TT218 are configured as swing gates
for use where vertical lift is impractical. All
other models are raised to allow passage of authorized
vehicles.
|
DSC7000
The DSC7000 beam barricade is used
worldwide at locations where wide
roadways need to be secured from
attacking vehicles. It provides protection
between 12- to 20-foot wide with
options to 30 feet (3.7 to 9.2 m).
The 725-pound beam of the vertical
lift barricade stops a 15,000-pound
(66.7 kN) vehicle traveling 50 mph
(80 kph) dead in its tracks, equivalent
to 1.2-million foot-pounds of kinetic
energy. It meets the K12 crash certification
standard set by the United States
Department of State.
The DSC7000(H) version operates remotely
by means of an integral Hydraulic
Pumping Unit (HPU) that is wholly
enclosed in the hinge end enclosure.
The HPU can be powered from a local
single or three-phase power source.
Alternatively, the DSC7000(H)
can be powered and operated automatically
from a Battery Powered HPU, which
can be maintained at operating
power level by a solar array
or by low power alternative sources.
The
Manual version of the Model DSC7000
Drop Arm Beam Barrier System can
be converted to fully automatic
operation by the addition of a
Delta hydraulic power unit and
appropriate control options. |
DSC7500 top
The DSC7500 swing beam barricade
is designed to close off one or two
lanes of a roadway and provide counter
terrorist level protection against
vehicle attack. The barricade stops
a 15,000-pound (66.7 kN) vehicle
traveling 50 mph (80 kph) with zero
penetration, equivalent to 1.2-million
foot-pounds of kinetic energy. It
meets the K12 crash certification
standard set by the United States
Department of State.
The DSC 7500 is supplied as
an easy to use manual gate or
powered with full automation
features. Other versions of the
DSC 7500 Series include a full
swing gate with anti-climb features
that can replace existing non-rated
swing gates. A cantilevered sliding gate
with the DSC 7000 series crash
beam is also available with the
full crash rating.
|
 TT212 top
The TT212 Cable Beam Barricade is
used at government facilities,
embassies and automotive sales
facilities. When
CarMax, the Auto Superstore® and
the nation’s leading specialty
retailer of used cars, needed
a low maintenance system that
would deter theft from their
lots and integrate with their
present security system, they
chose Delta Scientific’s
cable beam barricades. The
high-strength wire rope of the
TT212 will stop a non-armored
or non-tracked vehicle weighing
6,000 pounds at 40 mph (26,7
KN at 64 kph).
Cable beams are raised to allow
passage of authorized vehicles. Clear
opening ranges from 10.5 to 24
feet (3,200 mm to 7,315 mm) are
available to allow passage of
almost every type of vehicle.
Both TT212 Cable Beam Barricade
Hydraulic (H) and Manual (M) versions
are available. The
units are crash rated. |
 |
TT212E top
An enhanced version cable beam barricade,
the TT212E is designed for nuclear
power plant applications. Both
Hydraulic (H) and Manual (M)
versions are available. Crash
rated, the TT212E provides clear
opening ranges from 10.5 to 20 feet
(3,200 mm to 7,315 mm).
This barricade meets NUREG Specification. |
 |
TT212EC top
The TT212EC has the highest crash
rating of Delta’s beam
barricades. It has been
certified by the U.S. Department
of State to stop a 15,000 pound
vehicle in less than 20 feet. Actual
penetration is 5 feet.
Both hydraulic and manual versions
are available. Patents
are pending.
TT212EC
Printable Information .pdf file |
 |
TT218 top
The TT218 Cable Beam Barricade Swing
Gate is used at locations where
vertical lifts are impractical. It
provides clear opening ranges
from 10.5 to 24 feet (3,200 mm
to 7,315 mm.) Operation
is manual. |
 |
BB10MS top
BB10MS Hydraulic Cable Beam Barricade
features an integral hydraulic
pumping unit with bolt in place
cabinet along with a cast in
place latch and cable post. The
BB10MS is crash rated.
The length range is from 10
to 16 feet.
BB10M
Printable Information .pdf File |
|
|
|
| 
