Specifications For High Security Booth
• CK610BR4 (Shown)
High Security Prefabricated buildings to your specifications, meeting Bullet Resistant Levels 1, 2, 3 or 4 shipped fully assembled and ready for installation.

Protection against Level 1 impact, level 2 handgun 9mm or .357, Level 3 handgun .44 mag, 5.5, 12g shotgun and Level 4 and high-power rifle 30.06, 7.62, hand grenade, high explosives, tested and certified UL752. Glazing to be laminated with polycarbonate or Lexgard laminate clear/tinted with concealed interior fasteners.

All structural members meet or exceed ASTM A500. Frame structural tube steel 5/16" thick, laminated steel panel wall construction with insulation and inner panels (galvanized/pre-primed). Sliding or swing door fabricated from structural steel with heavy duty hardware for bullet resistance. Heavy duty steel counter with electrical access port. Fluorescent light fixture with (2) 40 watt tubes and a single pole switch. Electrical cabinet with duplex outlets, 125AMP, 120/240 volt, 6/12 station load center and 1500 watt heater. All electrical components will be UL approved and installed in accordance with the N.E.C. Finish will be primed and painted in accordance with the standards established by the Steel Structures Painting Council. All primer to be corrosion resistant with a finish coat of two-component industrial paint. Finish coat to have good fade, impact and chemical resistance, color selection by customer.

Contact Delta at (661) 575-1100 for any additional design options including air conditioning, sliding windows, insulation, flooring and other special needs.